How Much Does It Cost to Replace a Driveway in Pittsburgh?

Free online quotes Get pricing in minutes
Concrete and asphalt Repair, install, resurface
15 years in service Trusted across Pittsburgh

How Much to Remove and Replace an Old Driveway

A full driveway replacement in Pittsburgh — tearing out the old surface and pouring a new one — typically runs $8,000 to $16,000 for an average two-car concrete driveway, or $4,500 to $9,000 for asphalt, once demolition, hauling, base prep, and the new install are all factored in. The exact number for your driveway depends mainly on square footage, what’s underneath the old surface, and how the site is accessed, which is why a written estimate after a site visit is the only way to get a number you can actually plan around.

What "Replacement" Actually Includes

Replacement is a bigger scope than repair or resurfacing — it means removing the entire existing driveway down to the base, hauling away the old material, correcting the base if needed, and pouring or paving a brand-new surface. That's different from a repair, which patches or levels sections of an otherwise sound driveway, and different from resurfacing, which adds a new layer over an existing slab that's still structurally fine underneath.

Typical Replacement Cost by Size and Material

Driveway SizeConcrete ReplacementAsphalt Replacement
Single-car (approx. 300 sq ft)$4,000 – $7,500$2,200 – $4,000
Standard 2-car (approx. 600 sq ft)$8,000 – $14,500$4,500 – $8,000
Large / extended (approx. 900+ sq ft)$11,500 – $21,000+$6,500 – $12,000+

What Pushes the Price Up or Down

Demolition and hauling. A thicker old slab, or one that's reinforced with rebar or wire mesh, takes longer to break up and remove than a thinner, unreinforced surface — and disposal fees add up fast on larger driveways.

Base condition. If the soil or gravel base has washed out or was never compacted properly, it has to be corrected before the new surface goes down, which is exactly why a driveway that's failed once often needs base repair as part of the replacement rather than just a fresh pour on top of the same problem.

Access for equipment. A driveway a truck and mini excavator can reach directly costs less to replace than one behind a narrow gate, on a steep slope, or reachable only by hand-carrying material and debris.

Drainage and grading changes. If water has been pooling on or near the old driveway, correcting the grade or adding drainage during replacement costs more upfront but prevents the new surface from failing the same way.

Finish. A standard broom finish is the least expensive option. Stamped, colored, or exposed-aggregate finishes add cost but come as part of a full replacement rather than requiring a separate project later.

Replacement vs. Repair: Which Do You Actually Need?

If the damage is limited to one or two sections and the rest of the slab is sound, repair is almost always the cheaper move. Replacement makes more sense once cracking has spread across most of the surface, multiple sections have sunk or heaved, or the same spots have already been patched more than once — at that point you're usually paying to delay the inevitable rather than actually fixing the underlying problem.

Get an Exact Number

These ranges are a planning tool, not a quote. The only way to know your exact driveway replacement cost is a free on-site visit, where we check the base, drainage, and existing damage before putting a fixed price in writing — no surprise add-ons once demolition starts. Call us to schedule a free assessment anywhere in the Pittsburgh area.

Keep Exploring

Related Concrete Services & Areas

Concrete Driveway Pittsburgh

Get Your Free Pittsburgh Concrete Quote

Written fixed-price quotes. All permits handled. 5-year workmanship warranty. Free on-site visit.